Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Bulletin #: 2019-001


Category: 3

Program affectedPIPE-FLO® Professional

Build numbers affected: 16.0.40080, 16.0.40539, 16.1.41643,16.1.43757 

Approved by: JLS, SKC


The System Summary report in PIPE-FLO® Professional 16 was adapted to calculate Total System Liquid Volume from Total Pipeline Liquid Volume and Total Tank Liquid Volume. However, the Total Pipeline Liquid Volume was not updated to just take into account liquid only pipelines and was including gas pipelines in the calculation of pipeline volume. 


Select only the liquid part of the system and print the System Summary report via Print Selection to use only the liquid pipes in the calculation of Total Pipeline Liquid Volume.


A new report that can be installed with all the PIPE-FLO® Professional 16 versions is attached. Please download and install the new report for more accurate calculations around total pipeline liquid volume and total system liquid volume. 

  • No labels